HobbyKing
BOSCAM HD THUMBCAM 1080P (30FPS) 720P (60FPS)
| Image Sensor | 1/3.2 CMOS |
| Effective Pixels | 5.0 Mega Pixel |
| Exposure Control | Auto Exposure |
| White Balance | Auto White Balance |
| Quality | High, Medium, Low |
| Weight | 39g |
Parameters:, Lense:, Fixed Focus, f = 6mm, View = 50 degree, Photo:, Format JPEG size 2592 x 1944, Record Format:, H.264 Video Compression, 16:9 1920x1080 (30fps) 4:3 1440x1080 (30fps), 16:9 1280x720 (30fps) 16:9 1280x720 (60fps), 16:9 848x480 (60fps), Video Selection:, (5min/10min/15min/30min), Memory Medium:, Max Micro SD (TF Card) Support 32GB, Multifunction Interface:, AV out USB (Compatibale with standard MINI USB plug) DC Input, Mono Audio Cannel USB 2.0., Dimensions:, 72mm x 27.3mm x 20mm, Includes:, 3.7v 750mAh Lithium Battery,
HD Thumbcam 1080p (30fps) 720p (60fps) - Video or single ...5 Reviews
HobbyKing
HOBBYKING PARALLEL CHARGE BOARD FOR 6 PACKS 2~6S (EC5)
| Cell | 2~6S |
| Voltage | 0~22.2VDC |
| Max current | 30A |
| Connector | EC5/jst-xh |
| Note | The batteries should have same capacity. |
Battery:, 6 packs (same capacity & cell count),
Our very own in-house designed and built parallel charge board! ...HobbyKing
HOBBYKING X200 TOUCH SCREEN SMART BATTERY CHARGER 10A 6S
| Operating voltage range | 11.0~18.0VDC |
| Charge current range | 0.1~10A |
| Discharge current range | 0.1~3A |
| Current drain for balancing LiPo | 300mAh/cell |
| Lithium battery cell count | 1~6 |
| NiCd/NiMh battery cell count | 1~16 |
| Pb battery voltage | 2~24V |
| Dimension | 148 x 140 x 48mm |
Features:, • Large backlit 4.3" TFT display, Specs:, Touch Screen:, 4.3 inch 480 x 272px, Circuit Power:, Max 200W (charging) and Max 20W (discharging), Included in box:, Hobbyking X200 Touch Screen Charger, *Note:, User manual available for download located under the "Files" tab below,
The X200 Touch Screen Battery Charger is a revolutionary new ...5 Reviews
HobbyKing
TURNIGY ROTOMAX 150CC SIZE BRUSHLESS OUTRUNNER MOTOR
| Battery | 14 Cell / 51.8V |
| RPM | 150kv |
| Max current | 190A |
| Watts | 9800w |
| No load current | 51.8V/5.2A |
| Internal resistance | 0.011 ohm |
| Weight | 2530g |
| Diameter of shaft | 10mm |
| Stator Diameter | 101 |
| Lamination Tickness | 0.2mm |
| Suggested ESC | 250A 14S Compatible |
Winding:8T, Stator Pole:24, Motor Pole:20,
Upgrade your 150cc size gas engine model with the Turnigy ...HobbyKing
TURNIGY TRACKSTAR 1/8TH SENSORED BRUSHLESS MOTOR 1900KV
| Size | 4270 |
| RPM/v | 1900kv |
| Max voltage | 15V (4S) |
| Max Current | 120A |
| Max Watts | 1800W |
| Resistance | 0.012ohm |
| Shaft Size | 5mm |
| Can Diameter | 42mm |
| Can Length | 70mm |
| Weight | 329g |
Features:, • Sensor-Based for Excellent Torque and Low-Speed Driveability, *Note:, Sensor cable included, Specs:, Poles:4, Sensored:, Yes (Standard 6 pin harness),
The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at ...5 Reviews
HobbyKing
TURNIGY SK3 FANDRIVE - 3659-1600KV (90MM EDF)
| Motor Type | 4 Pole Inrunner |
| Voltage | 5~7S Lipoly |
| RPM/V | 1600kv |
| Internal resistance | 0.0145 Ohm |
| Max Loading | 65A |
| Max Power | 1680W |
| Shaft Dia | 5.0mm |
| Weight | 252g |
Winding:3D, Motor Plug:, 3.5mm Bullet Connector,
Turnigy SK3 Motors are the next leap forward in motor ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/5TH SENSORLESS BRUSHLESS MOTOR 760KV
| Size | 53.5x114mm |
| RPM/v | 760kv |
| Max voltage | 30V (8S) |
| Max Current | 160A |
| Max Watts | 4800W |
| Resistance | 0.011ohm |
| Shaft Size | 12mm |
| Bolt hole spacing | 30mm x 4, M4 |
| Can Diameter | 53.5mm |
| Can Length | 114mm |
| Weight | 1143g |
Features:, • Compatible with any Sensorless ESC, Specs:, Poles:4,
The Turnigy TrackStar Brushless Motors offer outstanding performance at an ...5 Reviews
HobbyKing
3660SL 3180KV BRUSHLESS INRUNNER (WATERCOOLED)
| Diameter | 36mm |
| Length | 60mm |
| Shaft diameter | 5mm |
| Max voltage | 18V |
| Max current | 94A |
| Idle current | 2.7A |
| Weight | 280g |
Kv:3180rpm/v,
3660SL 3180kv Brushless Inrunner (WaterCooled) This quality brushless inrunner motor ...5 Reviews
HobbyKing
TURNIGY ROTOMAX 80CC SIZE BRUSHLESS OUTRUNNER MOTOR
| RPM | 195kv |
| Max current | 150A |
| Watts | 6600w |
| No load current | 44V/4.8A |
| Internal resistance | 0.013 ohm |
| Weight | 1916g |
| Diameter of shaft | 10mm |
| Stator Diameter | 101 |
| Lamination Tickness | 0.2mm |
| Suggested ESC | 200A 14S Compatible |
Battery:, 12 Cell ~ 14 Cell / 44.4V ~ 51.8V, Winding:8T, Stator Pole:24, Motor Pole:20,
Upgrade your 80cc size gas engine model with the Turnigy ...5 Reviews
HobbyKing
TURNIGY MULTISTAR 4822-690KV 22POLE MULTI-ROTOR OUTRUNNER
| KV(RPM/V) | 690 |
| Max Surge Watts(W) | 320 |
| Working current | 16 amps |
| Max.current(10s) | 22 amps |
| No Load Current | 0.85 amp |
| Intemal Resistance | 0.052 ohm |
| Dimensions(Dia.xL) | 47.5 x 25 mm |
| Shaft | 6 mm |
| Prop | 12 x 3 - 14 x 5 |
| Weight | 95 g |
Spec:, Lipo cells:4s, Number of Poles:22,
Looking for the ultimate power system for your next Multi-rotor ...5 Reviews
HobbyKing
DR. MAD THRUST 120MM 11 BLADE ALLOY EDF 700KV - 7000WATT (12S)
| Features | • Pre-assembled |
| EDF Inner Diameter | 120mm |
| Outer Diameter | 125mm |
| Construction | Alloy |
| Max RPM | 35,000 |
| Max Power | 7000w |
| Continuous Power | 6500w |
| Max Voltage | 44.4v (12S) |
| Max Amps | 140A |
| Max Thrust | 7.5kg |
Specs:, Weight:, 1008g (complete unit with 4mm connectors), Motor Type:, 4035 4 Pole 700kv brushless outrunner,
Introducing our Dr. Mad Thrust high performance EDF series. The ...HobbyKing
DR. MAD THRUST 50MM 10 BLADE ALLOY EDF 3300KV
| Features | • Pre-assembled |
| Input Voltage | 4S 14.8V lipoly |
| Rotor Diameter | 50mm 10 Blade |
| Outer Diameter | 53mm |
| Max Amps | 27A |
| Max Thrust | 650g |
Specs:, Weight:, 93g with 2mm bullet connectors, Motor:, 20-40 Brushless Inrunner 3300kv,
Introducing our Dr. Mad Thrust high performance EDF series. The ...5 Reviews
HobbyKing
TURNIGY TRACKSTAR 1/10 10T 3900KV BRUSHLESS
| Max Voltage | 13v |
| Max current | 42 amps |
| Watts | 550 |
| Resistance | 0.0155 Ohms |
| Max RPM | 50000 |
| Length | 50mm |
| Diameter | 35.8mm |
| Shaft dia. | 3.175mm |
| Shaft length | 15mm |
| Weight | 168g |
:, Kv:3900,
Trackstar 3900Kv (10.0 Turn) sensorless brushless inrunner to suit 1/10 ...5 Reviews
HobbyKing
TURNIGY AQUASTAR 4084-1050KV WATER COOLED BRUSHLESS MOTOR
| RPM/v | 1050kv |
| Winding | 1.5Y |
| Max voltage | 22.2V (6S) |
| Max Current | 160A |
| Max Watts | 3100W |
| Resistance | 0.014ohm |
| No Load Current | 1.4A |
| Can Diameter inc. Water Jacket | 49mm |
| Can Length | 84mm |
| Shaft Size | 5mm |
| Weight | 490g |
| Motor Connector | 4mm bullet plug |
Features:, • CNC Machined Billet T6 Aluminum Motor Can, Specs:, Can Diameter:, 39mm (actual motor diameter),
The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for ...HobbyKing
TURNIGY AQUASTAR 4084-620KV WATER COOLED BRUSHLESS MOTOR
| RPM/v | 620kv |
| Winding | 2.5Y |
| Max voltage | 37V (10S) |
| Max Current | 105A |
| Max Watts | 3050W |
| Resistance | 0.03ohm |
| No Load Current | 0.7A |
| Can Diameter inc. Water Jacket | 49mm |
| Can Length | 84mm |
| Shaft Size | 5mm |
| Weight | 508g |
| Motor Connector | 4mm bullet plug |
Features:, • CNC Machined Billet T6 Aluminum Motor Can, Specs:, Can Diameter:, 39mm (actual motor diameter),
The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for ...